Talking of the Tecno Spark 4, we have put up the latest stock firmware of the phone along with the flash tool and a complete tutorial to help you install the stock ROM correctly on the device. We have laid out all the instructions in a simple and detailed manner. So, it should be a cakewalk for you to install stock ROM on Tecno Spark 4 KC2J.
Specification of Tecno Spark 4 KC2J/KC2:
Tecno Spark 4 mobile was launched on 25th September 2019. The phone comes with a 6.52-inch touchscreen display. Tecno Spark 4 is powered by a quad-core MediaTek Helio A22 (MT6761) processor. It comes with 3GB of RAM. The Tecno Spark 4 runs Android 9 Pie and is powered by a 4000mAh battery.
As far as the cameras are concerned, the Tecno Spark 4 on the rear packs a 13-megapixel primary camera with an f/1.8 aperture and a 2-megapixel camera. It sports an 8-megapixel camera on the front for selfies.
The Tecno Spark 4 runs HiOS 5.0 is based on Android 9 Pie and packs 32GB of inbuilt storage that can be expanded via a microSD card (up to 128GB) with a dedicated slot. The Tecno Spark 4 is a dual-SIM (GSM and GSM) mobile that accepts Nano-SIM and Nano-SIM cards. It was launched in Blue and Purple colors.
Connectivity options on the Tecno Spark 4 include Wi-Fi 802.11 a/b/g/n, GPS, USB OTG, 3G, and 4G. Sensors on the phone include an accelerometer and fingerprint sensor. The Tecno Spark 4 supports face unlock.
How to Flash Stock ROM File on Tecno Spark 4 KC2J?
Installing a stock ROM is pretty easy. All you have to do is download the stock ROM for the corresponding device. Then grab the USB drivers, an exclusive flash tool that we will use for performing the installation. Talking of the flash tool, we are using the SP Flash tool in this guide because the Tecno Spark 4 runs on the MediaTek chipset.
You will also require some other tools which we have listed out below. You have to download and install them as instructed. Before getting on towards the installation, let’s find out the importance of stock ROM.
Step 1: Download And Extract With Winrar The Stock Rom On Your Computer.
Step 2: After Extracting You Will Find The Firmware File, SP Flash Tool, Driver, And Instruction Manual.
Step 3: Install The USB Drivers. Skip If Drivers Are Already Installed On Your Computer.
Step 4: Open The Sp Flash Tools And Load The Scatter File From The Firmware Folder.
Step 5: Connect Your Smartphone To The Computer Using The USB Cable.
Step 6: Click On Upgrade Or Download Button In The SP Flash Tool To Begin The Flashing.
Step 7: Green Sign Will Appear At The Screen And Device Will Successful Flash