Today I had a problem that took me 2-3 hours to solve. It happened that a customer came with his mobile and told me that this phone is shutting down automatically. Then I told the customer that we have to flash it. Then the customer went to give the phone, but when I searched from Google and flashed this phone with a flash file, the phone was dead. Then I flashed from 3-4 files like this but the phone did not start. After this I got this working file, in which I will give you the link, you can download it from it. When I flashed from that file, the phone also started and the customer problem it was telling also solved.

Motorola Moto C XT1754 Dead Boot Fix ROM

The Motorola Stock ROM will help you to downgrade or upgrade the stock firmware of your Motorola Device. It will also help you to fix any software related issue, bootloop issue, IMEI issue.

Model Name: Motorola Moto C XT1754
File Name: Motorola Moto C XT1754 Dead After Flash Solution
Android Version: 7.0
ROM Size: 1 GB

Pre-Requirements To Flash Motorola Moto C Firmware:

  • Supported Phone: Motorola Moto C
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Motorola Moto C Download Tool: Download the SP Flash Tool and extract it (Install)
  • Motorola Moto C MTK Drivers and set up on your pc.

How To Flash With SP Flash Tool

Step 1: Download and install MTK USB Driver | Android CDC Driver on your PC. If a driver is already available & installed on your computer then skip this step.

READ  Redmi 6A MI Account, FRP Remove With SP Flash Tool No Need Authorize Login/Account

Step 2: Switch Power Off your Mediatek device and remove the battery if it removable.

Step3: Download the Stock ROM of your Mediatek device and extract it on your computer. You can find Stock ROM on FirmwareFile or search on google.

Step 4: Download and Extract SP Flash Tool on the computer. Once SP Flash Tool is extracted you will be able to see the following files.

Step 5: Now Open flash_tool.exe to launch the tool.

Step 6: Once SP Flash tool is launched click on the Scatter- Loading button.

Step 7: Now locate the Scatter File (You can find the Scatter file in the Stock ROM of your device).

Step 8: Now Uncheck the Pre loader option (Flashing the Preloader.bin can brick the device).

Step 9: Click on the Download button to begin the Flashing process.

Step 10: Connect your Mediatek device to the Computer using the USB cable (But make sure it is power off). After connecting the device to the computer Press Volume Down or Volume UP key so that SP Flash tool can detect the device.

Step 11: Once the computer detects your device, the Flashing process will start automatically.

Step 12: When flashing process is completed, a Green Ring will appear at the end.

Step 13: Now close the SP Flash Tool on the computer and disconnect the device from computer.

Wow Great, You have just learnt how to flash or Install Stock Firmware on Mediatek Devices by this article.

Point’s to be noted while this operation:

READ  GNQC Download Tool Latest Version [21-02-2021 Updated]

Caution: We don’t recommend you to flash the preloader.bin file using the SP Flash tool as it my brick the device. So please make sure to uncheck the preloader.bin option before starting the flashing process.

MediaTek USB Driver: If you are looking for the original Mediatek USB driver then please visit MTK USB Driver.

Credits: SP Flash Tool is created and distributed by Mediatek Inc. so full credit goes to them for sharing this tool for free.

Leave a Reply

Your email address will not be published. Required fields are marked *